Spare Parts Hope TECH 4

Order

HOP-6842

BEARING 684 ZZ 9x4x4

Balls bearing fo the lever axle in Hope Tech 4 master cylinders range. Every master cylinder needs two units of this bearing. Sealed in both sides to avoid dust. Model 684 2RS in size 9x4x4 mm. Made in steel.

Brand: HOPE

3,25 EUR VAT included

HOP-240

HOPE BLEED NIPPLE RUBBER CAP TRIAL ZONE

Original Hope bleed nipple rubber cap for Hope Trial Zone and X2 series brake calipers. This cap protects the nipple cap against dust or undesirable hits. Fixing system on the nipple to evite lose the cap. Made in elastic rubber and black finished. Original Hope spare part. 2 grams of weight.

Brand: HOPE

3,50 EUR VAT included

HOP-BLED

HOPE BLEEDING BRAKE CALIPER SCREW TRIAL ZONE

Bleeding oil circuit screw for Hope Trial Zone brake calipers. This screw is located in the inner side of the caliper and is used to bleed the oil circuit in case of reparation or air bubbles inside de circuit. Silver finished. Original Hope spare part. Weight 5 grams.

Brand: HOPE

8,50 EUR VAT included

HOPE-RACO1

HOPE BRAKE CALIPER 90º NIPPLE

Threated nipple for MonoTrial and Trial Zone Hope calipers. This nipple is located at the end of the hose and is fixed on the caliper by an specific Hope screw. Original Hope spare part. Silver finished. Weight of 1.5 grams.

Brand: HOPE

12,60 EUR VAT included

HOP-BOLT

HOPE BRAKE CALIPER NIPPLE SCREW

Hope screw for MonoTrial and Trial Zone Hope calipers. This screw fixes the hose on the caliper by the external side of the caliper. Fix and unfix with an 8mm hexagonal key tool. Original Hope spare part. Silver finished. Weight of 1.8 grams.

Brand: HOPE

5,50 EUR VAT included

HOPE-HOSE

HOPE BRAKE HOSE FULL SET

Original Hope hose full set. Ready to install in any MonoTrial and Trial Zone brake. Compatible with Tech 3 master cylinders. Includes all necessary to install o replace the old hose. For front or rear brake long (20 inches bicycles). Includes all racors, washers and hardware to install.

Brand: HOPE

from 35,80 EUR VAT included

HOP-olive

HOPE BRAKE HOSE LOCKER (OLIVE)

Original Hope hose locker, called OLIVE in trials slang, for Hope brake original hose. Need to repair the Hope brake systems in case hose braking or hose replacement. Gold finished. Spare part for only one use. For 5mm diameter Hope hoses. 5 grams of weight.

Brand: HOPE

1,99 EUR VAT included

HOP-158

HOPE BRAKE HOSE RACORD

Original Hope spare part for disc brake systems. This racord fasten and block the brake hose with the master cylinder or caliper. For 5mm hoses. Fasten with hexagonal 8mm tool. Silver finished. Weight of 1.6 grams.

Brand: HOPE

8,30 EUR VAT included

HOP-clip

HOPE CLIP BRAKE PADS AXLE

Original Hope Trial Zone and Monotrial brake pads axle lock. Compatible with front and rear brake axles. Original Hope spare part.

Brand: HOPE

1,20 EUR VAT included

HOP-washer

HOPE COPPER WASHER 2mm

Cupper washer 2mm (internal hole) original Hope. This washer is located between the body of the master cylinder and the output metallic racord inside de hose (ref. HOP-pin). Compatible with all Trial Zone Hope brakes series. Original Hope spare part. (Consult other locations).

Brand: HOPE

0,60 EUR VAT included

HOP-26

HOPE COPPER WASHER 6 mm

Cupper washer 6 mm (internal hole) original Hope. This washer is located between the body of the master cylinder and the output metallic racord. Compatible with all Trial Zone, Tech 3 and Monotrial Hope brakes series and Trial Zone calipers. Original Hope spare part.

Brand: HOPE

0,90 EUR VAT included

HOP-pin

HOPE HOSE PIN

Original Hope adjustent screw compatible with all Mono Trial Hope brakes series. Original Hope spare part.

Brand: HOPE

2,99 EUR VAT included

HOPE MASTER CYLINDER TECH 4 COVER DIAPHRAGM RUBBER

OUT OF STOCK

HOP-DT4

HOPE MASTER CYLINDER TECH 4 COVER DIAPHRAGM RUBBER

Original Hope diaphragm, located between the cap and the body of the bomb. Compatible with all Tech 3 master cylinders. Original Hope spare part.

Brand: HOPE

4,70 EUR VAT included

IT´S NEW

HOP-424

HOPE MASTER CYLINDER TECH 4 LID

Original Hope master cylinder lid in black. Compatible with Hope Tech 4 master cylinders. For right and left side. Includes the two bolts needed to fix on the master cylinder. Original Hope spare part. Black anodised finished with laser Hope logos in white. Weight of 4 grams.

Brand: HOPE

19,50 EUR VAT included

HOP-SPT3

HOPE PISTON STOP PLATE MASTER CYLINDER TECH 3 / TECH 4

Original Hope stop plate for Hope master cylinder pistons. Compatible with all Tech 3 and Tech 4 master cylinders. Original Hope spare part.

Brand: HOPE

3,60 EUR VAT included

HOP-TZCP

HOPE PISTON TRIAL ZONE BRAKE CALIPER

Original Hope piston for Mono Trial and Trial Zone calipers. Magnetic center to facilitate the installation and backward movement of the pads. No compatible with other brake brands. Two units needed for every caliper. Original Hope spare part. Silver finished. 21 grams of weight.

Brand: HOPE

19,95 EUR VAT included

HOP-111

HOPE RESERVOIR CAP SCREW

Original Hope screw to secure the reservoir cap of the master cylinder. Compatible with all Monotrial, Trial Zone and Tech 3 models. Every reservoir cap needs two units of this screw to be fixed on the master cylinder. Original Hope spare part.

Brand: HOPE

1,59 EUR VAT included

HOP-SCSPL

HOPE STOP PLATE BOLT

Brand: HOPE

1,40 EUR VAT included

HOP-RBT3

HOPE TECH 3 / TECH 4 BRAKE LEVER REGULATION BOLT

Original Hope adjuster bolt for Tech 3 and Tech 4 series master cylinder levers. Compatible with all Tech 3 series levers. Not includes the final washer. Made in aluminium and CNC machining. Red anodised finished. Original Hope spare part. 4 grams of weight.

Brand: HOPE

9,90 EUR VAT included

HOP-425

HOPE TECH 4 BRAKE MASTER CYLINDER PIVOT BOLT

Pivot bolt for Hope Tech 4 master cylinder lever. Made in steel and silver finished. No compatible with other Hope master cylinders. Original Hope spare part. 2 grams of weight.

Brand: HOPE

8,95 EUR VAT included

HOP-KITT4

HOPE TECH 4 MASTER CYLINDER SEALS KIT

Original Hope seals compatible with all Tech 4 series. This kit includes all necessary for the reparation and manteinance of the Tech 4 master cylinder. Original Hope spare part.

Brand: HOPE

17,50 EUR VAT included

HOPE-LT4

HOPE TECH 4 TRIAL BRAKE LEVER

Hope original brake lever for all Tech 4 master cylinders. Made in aluminium 2014-T6 and CNC machined. Reversible lever: suitable for right and left brakes. Black finished and white logos. 13 grams of weight.

Brand: HOPE

34,95 EUR VAT included

HOP-CALSTZ

HOPE TRIAL ZONE BRAKE CALIPER CAP SEAL

Original Hope piston seal for Trial Zone caliper cap. This seal evite oil leak outside the caliper. Original Hope spare part.

Brand: HOPE

1,90 EUR VAT included

HOP-AXLETZ

HOPE TRIAL ZONE BRAKE PADS AXLE

Original Hope Trial Zone brake pads axle. Compatible with front and rear brake calipers. Fix with a 4mm allen key. Original Hope spare part.

Brand: HOPE

5,50 EUR VAT included

HOP-207

HOPE TRIAL ZONE PISTON BRAKE CALIPER SEALS SET

Original Hope piston seal for caliper pistons of MonoTrial and Trial Zone Hope brake models. This seal evite oil leak in caliper pistons. Original Hope spare part.

Brand: HOPE

9,80 EUR VAT included

HOP-428

LEVER PIVOT NUT HOPE TECH 4 MASTER CYLINDER

Hexagonal nut to fix the lever axles in all Hope Tech 4 master cylinders range. Compatible with all Tech 4 Hope brakes series. M3 internal threat. for 6 mm hexagonal key tool. Original Hope spare part.

Brand: HOPE

5,90 EUR VAT included

HOP-MCPT4

MASTER CYLINDER PISTON HOPE TECH 4

Original Hope piston, spring and seals kit compatible with all TECH 4 Hope brakes series. Complete kit for master cylinder. Refill oil and purge system after replacement needed. Original Hope spare part.

Brand: HOPE

23,40 EUR VAT included

HOP-408

PRIMARY PISTON SEAL HOPE TECH 4 MASTER CYLINDER

Original Hope primary piston seal for it Tech 4 master cylinders range. Compatible with all Tech 4 Hope brakes series. Refill oil and purge system after replacement needed. Original Hope spare part. Black rubber finished.

Brand: HOPE

5,20 EUR VAT included

HOP-172

PVC HOPE BRAKE HOSE (PRICE PER 1 METER)

Hope original hose for the manteinance and reparation of Hope hydraulic disk brake systems. It is sold per meters. 2 meters long is enough to fit a 20 inches trial bicycle rear and front brakes. Compatible with all Hope Trial brake models. Black colour. Made in PVC for synthetic oil.

Brand: HOPE

12,00 EUR VAT included

HOP-430

SECONDARY PISTON SEAL HOPE TECH 4 MASTER CYLINDER

Original Hope secondary piston seal for it Tech 4 master cylinders range. Compatible with all Tech 4 Hope brakes series. Refill oil and purge system after replacement needed. Original Hope spare part. Black rubber finished.

Brand: HOPE

5,20 EUR VAT included