Original Hope bleed nipple rubber cap for Hope Trial Zone and X2 series brake calipers. This cap protects the nipple cap against dust or undesirable hits. Fixing system on the nipple to evite lose the cap. Made in elastic rubber and black finished. Original Hope spare part. 2 grams of weight.
Brand: HOPE
Bleeding oil circuit screw for Hope Trial Zone brake calipers. This screw is located in the inner side of the caliper and is used to bleed the oil circuit in case of reparation or air bubbles inside de circuit. Silver finished. Original Hope spare part. Weight 5 grams.
Threated nipple for MonoTrial and Trial Zone Hope calipers. This nipple is located at the end of the hose and is fixed on the caliper by an specific Hope screw. Original Hope spare part. Silver finished. Weight of 1.5 grams.
Hope screw for MonoTrial and Trial Zone Hope calipers. This screw fixes the hose on the caliper by the external side of the caliper. Fix and unfix with an 8mm hexagonal key tool. Original Hope spare part. Silver finished. Weight of 1.8 grams.
Original Hope hose full set. Ready to install in any MonoTrial and Trial Zone brake. Compatible with Tech 3 master cylinders. Includes all necessary to install o replace the old hose. 90 cm long (front brake) and 149 cm long (rear brake). Other measures under request. Includes all racors, washers and hardware to install. 29 grams of weight (90 cm).
Original Hope hose locker, called OLIVE in trials slang, for Hope brake original hose. Need to repair the Hope brake systems in case hose braking or hose replacement. Gold finished. Spare part for only one use. For 5mm diameter Hope hoses. 5 grams of weight.
Original Hope spare part for disc brake systems. This racord fasten and block the brake hose with the master cylinder or caliper. For 5mm hoses. Fasten with hexagonal 8mm tool. Silver finished. Weight of 1.6 grams.
Original Hope Trial Zone and Monotrial brake pads axle lock. Compatible with front and rear brake axles. Original Hope spare part.
Cupper washer 2mm (internal hole) original Hope. This washer is located between the body of the master cylinder and the output metallic racord inside de hose (ref. HOP-pin). Compatible with all Trial Zone Hope brakes series. Original Hope spare part. (Consult other locations).
Cupper washer 6 mm (internal hole) original Hope. This washer is located between the body of the master cylinder and the output metallic racord. Compatible with all Trial Zone, Tech 3 and Monotrial Hope brakes series and Trial Zone calipers. Original Hope spare part.
Original Hope adjustent screw compatible with all Mono Trial Hope brakes series. Original Hope spare part.
Original Hope stop plate for Hope master cylinder pistons. Compatible with all Tech 3 and Tech 4 master cylinders. Original Hope spare part.
Original Hope piston for Mono Trial and Trial Zone calipers. Magnetic center to facilitate the installation and backward movement of the pads. No compatible with other brake brands. Two units needed for every caliper. Original Hope spare part. Silver finished. 21 grams of weight.
Original Hope screw to secure the reservoir cap of the master cylinder. Compatible with all Monotrial, Trial Zone and Tech 3 models. Every reservoir cap needs two units of this screw to be fixed on the master cylinder. Original Hope spare part.
Original Hope adjuster bolt for Tech 3 and Tech 4 series master cylinder levers. Compatible with all Tech 3 series levers. Not includes the final washer. Made in aluminium and CNC machining. Red anodised finished. Original Hope spare part. 4 grams of weight.
Original Hope piston seal for Trial Zone caliper cap. This seal evite oil leak outside the caliper. Original Hope spare part.
Original Hope Trial Zone brake pads axle. Compatible with front and rear brake calipers. Fix with a 4mm allen key. Original Hope spare part.
Original Hope piston seal for caliper pistons of MonoTrial and Trial Zone Hope brake models. This seal evite oil leak in caliper pistons. Original Hope spare part.
O-Ring for original Magura HS33 2014 master cylinder pistons (this piston is 14 mm of diameter). Not original spare part but compatible.
Brand: BIKENBICI
Hope original hose for the manteinance and reparation of Hope hydraulic disk brake systems. It is sold per meters. 2 meters long is enough to fit a 20 inches trial bicycle rear and front brakes. Compatible with all Hope Trial brake models. Black colour. Made in PVC for synthetic oil.