Half link connector for narrow chains used in BMX and some Trial and Biketrial bicycles. It is useful to adjust the best length of your chain because the length of the chainstay or your gear. Compatible with all 1/8 chains. Silver finished. 5 grams of weight.
Brand: BIKENBICI
Wheels set for Trialsin clássic 20 inches bicycles. Aluminium Mach1 rims. 36 holes. Spokes and nipples in steel. Size 20 x 2.125. Balls bearings. Solid axle with nuts. Ready to install and ride. 1570 grams of weight (set).
Rear wheel for Trialsin clássic 20 inches bicycles. Aluminium hub and Mach1 aluminium rim. 28 holes. Spokes and nipples in steel. Size 20 x 2.125. Balls bearings. Solid axle with nuts. For 115mm width forks. Ready to install and ride. 835 grams of weight.
Front wheel for Trialsin clássic 20 inches bicycles. Sunrace aluminium hub and Mach1 aluminium rim. 36 holes. Spokes and niplles in steel. Size 20" x 2.125. Balls bearings. Solid axle with nuts. For 100mm width forks. Ready to install and ride. 735 grams of weight.
Flat repair kit from Velox brand. This kit is composed by four patches of 25mm of diameter, two patches of 15mm of diameter, little sandpaper sheet to clean and 5ml glue tube. Presented in plastic box to carry easily.
Brand: VELOX
Rubber protector for V-Brake braking systems. This rubber is placed between the two brake wheel levers, protecting the wire between both ones. 36mm long. Compatible with most V-Brake systems in the market. Black finished. 1 gram of weight.
V-Brake systems elbows set. This set includes un front and one rear elbow. Made in aluminium. Includes an internal teflon cover for smooth working of the wire. Silver finished.
Triangle bridge for Cantilever brake systems. Used in some Trialsin models from Monty brand and others. Includes bolt to fix the wire from brake lever. Compatible with MTB cantilever brake systems. Made in steel.
Special bolt for classic seat clamps as BH spanish brand and others. M8 x 38mm bolt. Special cap only for clamps using this kind of system. Silver finished. Includes M8 nut and 8mm of diameter elastic washer.
Allen bichromated (yellow chromed) bolts set suitable for classic Trialsin bicycles. Used in first Monty models to fix the handlebar on the fork. Includes the three sizes needed (check measures in the description).
Drive bearings kit for classic Trialsin bicycles. For 1-1/8 inches drive bearings.
Couple of plastic caps to cover the steel bolts of BB parts and cranks square axle type. Made in plastic black finished. Fit on the crank by pressure, not screwed. For Trialsin and Trial classic bicycles and cotterless (JIS) axles bolts. 2 grams of weight (couple).
Balon horseshoe type brake system for Trialsin bicycles. Made in aluminium. Available for front or rear brake. High balon special for off road Trialsin tires. Size 73-91mm. Silver finished. Axle with special long for front or rear brake. Brake pads included.
Brand: ALHONGA
Brake tensioner for horseshoe brake systems as Olimpic or similar. M6 screw. Made in aluminium.
Bottom bearings set for Trialsin bicycles with threat 1.37"x24tpi. This kit includes both bottom bracket cups, two ball bearings and adjustment nut. 125 grams of total weight.
Long sleeves T-Shirt 1983 Monty Factory Team Replica. Design 100% faithful to Monty original design: pattern designing, design and colours. Round neck. Made in high breathable Ion fabric. Antibacterial fabric based in silver ions. MANUFACTURING UNDER REQUEST. Consult table for sizes.
Long sleeves Shirt 1983 Monty Competition Replica. Design 100% faithful to Monty original design: pattern designing, design and colours. Round neck. Made in high breathable Ion fabric. Antibacterial fabric based in silver ions. MANUFACTURING UNDER REQUEST. Consult table for sizes.
Long sleeves shirt Montesa Competition Replica. Design 100% faithful to Montesa original design: pattern designing, design and colours. Round neck. Made in high breathable Ion fabric. Antibacterial fabric based in silver ions. MANUFACTURING UNDER REQUEST. Consult table for sizes.
Missing link from Sunrace brand for narrow chains used in Trial and Biketrial. 7,3mm width. Compatible with all 1/2" x 3/32" chains. Silver finished. 5 grams of weight.
Brand: SUNRACE
Stickerset from Talleres Fargas enterprise (builder of Monty frames at the beginning), used in some models as T-19 aero, T-11 aero, T-19 serie 2, T-219 1987... BIKENBICI.COM EXCLUSIVE PRODUCT.
Sticker from Nagesti enterprise used in some models as T-19 aero, T-11 aero, T-19 serie 2, T-219 1987... BIKENBICI.COM EXCLUSIVE PRODUCT.
Stickerset from BH Bicycles enterprise, mounted in the first models of Monty T-19 aero, T-11 aero and T-219 1987. BIKENBICI.COM EXCLUSIVE PRODUCT.
Circular Repsol sticker 5 cm of diameter. Brand placed in the nylon chainwheel protector of some series of Montesa bicycles, the Montesitas. Made in high quality vinyl. Bikenbici exclusive product.
Montesa original sticker used in all the number plates used in some Montesa models. Sticker. 27mm of diameter.
Chromed seat post for classic bicycles. 22.2mm of diameter. 200mm long.
Seat clamp for all kind of seats with twin bars system. Universal.
Seat clamp for all kind of seats with twin bars system. Black finished. Universal size.
Spacer washer from Monty brand for all Monty bashguards. Made in high density rubber. Measures 18x6x4mm. For M6 screws. Price per unit. Weight 1,4 grams.
Classic pedals made in rubber and steel used in some models of Bici-Trial and Trialsin bikes.
Number plate Montesa installed in some Montesa Trialsin models (T-15 and T-05). Includes original Montesa sticker.
Brand: GONELI
