Repair kit from Magura brand for some of their brake models. Includes all necessary to repair your brake in case of breakage or maintenance. For rim brakes and disc brakes. All the stuff is delivered inside a cardboard Magura box.
Brand: CLEAN
Classic crank cotter pin for cranks with this kind of clamp. 9 milimeters of diameter. M6 thread. Silver finished. 19 grams of weight.
Brand: BIKENBICI
Chain for single speed (1 speed), fixing, children and internal gear hub bicycles. 1/8" wide and bridge lock.
Brand: KMC
KMC chain for Trial and Biketrial bicycles. Narrow model Z1eHX. Anti oxide treatment with technology EcoProTeQ. Narrow size 1/2" x 3/32". 80 links long. Only compatible with 1 speed transmissions. Silver finished. 269 grams of weight (80 links).
Half link connector for narrow chains used in Trial and Biketrial. It is useful to adjust the best length of your chain because the length of the chainstay or your gear. Compatible with all 1/2" x 3/32" chains. Dark brown finished. 4 grams of weight.
Cantilever brake system type for classic Trial and Biketrial bicycles. Made in aluminium and compatible with all frames and forks with Cantilever and V-Brake supports. Includes hardware necessary to install.
Brand: ALHONGA
Brake wire with final in pear form for BH or similar or brake levers. Long of 1800mm. For front and rear brake. Includes hose pin to clinch the hose end.
Brake wire with final in barrel shape for V-Brake levers and compatibles. Long of 1800 mm. For front and rear brake. Includes hose pin to clinch the hose end.
4 black pads set. For horseshoe brake systems (Olimpic Balon type). Pad size of 40mm.
Brake wire housing set for Monty T-19 aero model. Grey colour as original model and cutted at the exact size as original bicycle. Includes all housing ends in both sides. Set includes front and rear housing.
Brake wire housing set for Monty T-17 aero model. Grey colour as original model and cutted at the exact size as original bicycle. Includes all housing ends in both sides. Set includes front and rear housing.
Brake wire housing set for Monty T-11 aero model. Grey colour as original model and cutted at the exact size as original bicycle. Includes all housing ends in both sides. Set includes front and rear housing.
Brake wire prisoner for horseshoe brake systems as Olimpic or similar. Made in steel.
Brake wire prisoner for horseshoe brake systems as Olimpic or similar. 5 mm threat. Made in steel.
Pair of nuts for bottom bearing axle with external axle in every side. Compatible with all cotterless axles with external axles to fix the cranks. Black finished.
Bearings kit for classic axles used in Trialsin bicycles.
BB parts for cotterless crankset systems (square axle). Aluminium. Works on sealed bearings. Length 127mm. For 68mm frame cases. Frame case screw size 1.37"x24. Silver finished. Weight: 286 grams.
Brand: SUNRACE
BB parts for cotterless crankset systems (square axle). Sealed bearings. Works on sealed bearings. Different axle lengths: 122 mm and 127 mm. Frame case screw size 1.37x24T.
Full bottom bracket for Trialsin bicycles. Thread measure 1.37" x 24T . Axle available in four different sizes. Includes cranks bolts. Chrome finished.
BB parts axle made in steel for classic Trialsin bicycles. Available in different sizes. Includes cranks bolts.
Brake wire set composed by 2 meters of brake black housing + 4 silver end cups. Hose 5mm of diameter and internal nylon tube for an smooth way of the wire. Compatible with all V-Brake systems and compatible. For modern and classic bicycles.
Nylon bashguard used in some Montesa models as T-15 and T-12. Made in nylon and the same look and sizes as brand original one.
Brand: GONELI
Nylon bashguard used in some Montesa and Monty models as, como la T-15, T-12, T-11 aero, T-17 aero, T-19 aero, T-215. Made in nylon and the same look and sizes as brand original one.
Bottom bearings 10 units set for Trialsin and BMX classic bikes. Size 6,350mm (1/4). Made in steel C85 grade 100. DIN 5401. 10 units bag.
Rear hubs bearings 10 units set for Trialsin and BMX classic bikes. Size 5,556mm 7/32. Made in steel C85 grade 100. DIN 5401. 10 units bag.
Front hubs bearings 10 units set for Trialsin and BMX classic bikes. Size 4,762mm (3/16). Made in steel C85 grade 100. DIN 5401. 10 units bag.
Headset bearings 10 units set for Trialsin and BMX classic bikes. Size 3,969mm (5/32). Made in steel C85 grade 100. DIN 5401. 10 units bag.
Freewheel bearings 10 units set for Trialsin and BMX classic bikes. Size 3,175mm (1/8). Made in steel C85 grade 100. DIN 5401. 10 units bag.
Classic 3 pieces missing link for wide 1 speed chains used in Trial and Biketrial. Compatible with all 1/2 x 1/8 chains. Silver finished. 6 grams of weight.
Brand: CLARKS
Classic 3 pieces missing link for narrow chains used in Trial and Biketrial. Compatible with all 1/2" x 3/32" chains. Silver finished. 6 grams of weight.