Handlebar and stem set from Comas brand. For 20 inches bikes and 970mm frames. Best set to improve your bike to the new riding style. 105mm height. 130mm long stem. Matt black anodised finished with Comas logos in white. 508 grams of weight (set).

HANDLEBAR MAIN FEATURES

· Aluminium handlebar from Comas brand for Trial and Biketrial bicycles.
· Measure recommended to use in 20 inches bikes with 20º of inclination Comas stems.
· Made in 7075-T6 aluminium with exclusive geometry according to nowadays riding style.
· More total height and minor angle in extremes getting a better mobility while riding.
· Exclusive geometry reducing the center of gravity keeping the handlebar position (no negative angle).
· Tributted construction for an excellent combination of rigidity and weight.
· Ø31,8 mm of diameter, compatible with most stems used in Trial and Biketrial.
· Central nonius to fix the handlebar in the same position in case of removing.
· Cut lines in both extremes of the handlebar to facilitate the cut to the desired measure.
· It design offers and excellent grip, feeling and durability.
· For competition and/or training use.
· Matt black anodised finished with Comas logos in white.
· Weight of 305 grams (not cut).

Measures of the handlebar 105H

· Long: 720mm.
· Elevation: 8º
· Swipe: 6º
· Height: 105mm

STEM MAIN FEATURES

· Stem from Comas brand for Trial and Biketrial bicycles.
· Exclusive geometry 130mm long and 20º of inclination, reducing the center of gravity keeping the handlebar position (no negative angle).
· 3D forged aluminium design in one piece and any welding.
· Lighted frontal area 50mm wide.
· Frontal clamp by four M5 screws, getting a maximum contact between handlebar and stem.
· Lower clamp by two M5 screws, rounded to protect knees against hits.
· Compatible with all oversized 31.8mm handlebars.
· Made in 3D forged aluminium 7050-T6.
· Sand Blasted Black finished with COMAS logos laser engraved.
· 196 grams of weight (including steels hardware).
TECHNICAL NOTE: This stem must be installed in a flat cut fork tube (not sweeping).

Measures of the stem

· Long: 130mm
· Angle: 20º
· Handlebar diameter: Ø31.8mm